Emblems on Vehicles with Adaptive Cruise Control

Emblems on Vehicles with Adaptive Cruise Control

Removing

- Release the upper retaining hooks on the back side of emblem - 4 - with radiator grille - 1 - removed.





- Remove emblem - 4 - with lower catches - arrow a - from retaining ring - 3 - or radiator grille - 1 -.

- To remove retaining ring - 3 -, both catches - arrow b - in radiator grille - 1 - must be released.

Installation

• Before installing emblems, see notes about Adaptive Cruise Control Sensor -G550- - 2 -. Refer to

- Press retaining ring - 3 - into radiator grille - 1 - until both retaining hooks engage - arrow b -.





- Place emblem - 4 - with lower retaining hooks - arrow b - in the recesses in retaining ring - 3 - or the corresponding recesses in radiator grille - 1 -.

- Press emblem - 2 - with the upper retaining hooks into retaining ring - 3 - or radiator grille - 1 - until the retaining hooks engage.