Rear Window, Damaged

Rear Window, Damaged

Removing

- Protect body and interior from glass splinters.

- Remove glass pieces from adhesive material.

- Disconnect harness connectors for window defroster and window antenna.

- Bond flange - 1 - all around with fabric reinforced adhesive tape.





- Cut through adhesive material (with glass residue) in window cutout with electric cutter (V.A.G 1561 A) - 3 - and cutting blade (V.A.G 1561/10 ) - 2 -.

CAUTION!
Always wear protective goggles and leather gloves.

Installing

Window, Preparing for Glazing => [ Window, Undamaged, Preparing for Glazing ] Window, Undamaged, Preparing for Glazing

Window, New, Preparing for Glazing => [ Window with Pre-Coating, New, Preparing for Glazing ] Window with Pre-Coating, New, Preparing for Glazing

Window Flange, Preparing for Glazing => [ Window Flange, Preparing for Glazing ] Window Flange, Preparing for Glazing

Installation Information => [ Installation Information ] Installation Information

Minimum Curing Time => [ Minimum Curing Time ] Minimum Curing Time