Brake Line Flanging Tool Assembly Overview

Brake Line Flanging Tool Assembly Overview





1 Upper part of flanging tool

• Remove to change clamp jaws

2 Hand grip mount

• Must be removed to reach retaining screw for upper part.

3 Retaining screw

• For upper part of flanging tool.

4 Clamp jaws threaded pins

• Centers and hold the clamp jaws.

• 2 mm head.

5 Clamp jaws

• Various

• Assembly instructions, refer to => [ Clamp Jaws Assembly Instructions ]

Clamp Jaws Assembly Instructions





• (VAS 6056/6) (dark) for black brake lines

• (VAS 6056/7) (light) for green brake lines

• The arrow on the rounded side of the clamp jaws must face toward the edge of the housing and the straight side of the clamp jaws must be installed toward the spindle, otherwise the flared head will not be formed correctly.