ABS Wheel Speed Sensor (Front Axle)

ABS Wheel Speed Sensor (Front Axle)

Removing
- Raise vehicle.





- Disconnect harness connector - 1 - from wheel speed sensor wire and wheel speed sensor.
- Remove bolt - 2 - from stub axle.
- Pull ABS wheel speed sensor out of stub axle.

Installing
- Before inserting wheel speed sensor, clean inner surface of hole and coat sensor completely with securing grease G 000 650
- Insert wheel speed sensor in hole of stub axle and tighten bolt to 8 Nm.
- Connect wheel speed sensor and sensor wire.