With Manufacturer's Scan Tool

DTC Memory, Erasing
- Connecting VAG1551 or VAS5051 - Scan Tool, Connecting and initiating On Board Diagnosis (OBD) - Airbag OBD, Initiating Program.
- Switch on printer with Print button (warning lamp in button lights up) if using VAG1551 or print via the print menu when using VAS5051, if necessary.

Prerequisites:
- Malfunction is repaired
- DTC memory checked again

- Press buttons 0 and 5 (the function "Erase fault memory" is entered with 05).

Indicated on display:

Rapid data transfer Q
05 Erase fault memory

- Confirm entry with Q button.

Indicated on display:

Rapid data transfer arrowright
Fault memory is erased.

- arrowright Press button

Indicated on display:

Rapid data transfer HELP
Select function XX

NOTE:
- If this appears in the display, the test sequence has malfunctioned.

WARNING: Fault memory was not interrogated

- Adhere exactly to test sequence: first of all interrogate DTC memory, then erase memory.

Output, Ending
- Press buttons 0 and 6 to end the output.

Indicated on display:

Rapid data transfer Q
06 End output

- Confirm entry with Q button.

Indicated on display:

Rapid data transfer HELP
Enter address word XX

- Switch off ignition and disconnect diagnostic connection.