Heating and Ventilation Cables

Heating and Ventilation Cables

NOTE:
- Cable sleeve ends are color coded.
- Check cables before installing. Replace binding or damaged cables.
- Attach cables to removed controls first and then attach to levers at heating and ventilation unit.
- All air doors must audibly move onto end stops when turning controls.







1 - Central door cable
- From air distribution rotary control to central door
- Cable sleeve marking: Yellow
2 - Footwell/defrost door cable
- From air distribution rotary control to footwell/defrost door
- Cable sleeve marking: Green

Removing
- Remove heating and ventilation controls
- Unclip cable from controls
- Remove steering column trim.
- Unclip cable at heating and ventilation unit.

Installing
- Installing and Adjusting

3 - Heating and ventilation controls
4 - Temperature door cable
- From temperature rotary control to temperature door
- Cable sleeve marking: Beige