Sealing Flange Assembly Overview

Sealing Flange Assembly Overview





1. Belt pulley/vibration damper
2. Bolts
^ 5 pieces
^ Replace
^ Tightening torque

Strength category 12.9:

- 70 Nm

Strength category 10.9:

- 50 Nm plus an additional 1/4 turn (90 degree)

3. 10 Nm
4. Sealing flange on belt pulley side
^ With integrated sealing ring
5. Cylinder block
6. 60 Nm plus an additional 1/4 turn (90 degree)
^ Replace
7. Drive plate/flywheel
^ To remove, secure crankshaft using locking pin T40069
8. Sensor wheel
^ For Engine Speed (RPM) Sensor G28
^ With position holder
9. Sealing ring (transmission side)
10. Control housing cover
11. O-ring
^ Replace
12. 25 Nm
13. Fitting sleeves
14. 5 Nm
15. Engine speed (RPM) sensor G28
16. Seal
^ Replace