Function 05 - Erasing DTC Memory

Function 05 - Erasing DTC Memory

Note:
^ All functions which could previously be performed with Scan Tool VAG1551 can also be performed with the Vehicle Diagnostic Testing and Information System VAS5051.

Requirements
^ DTC memory has been checked

- Press arrow right button.

Indicated on display

Rapid data transfer HELP
Select function XX

- Press buttons 0 and 5 to select "Erase DTC Memory" function 05.

Indicated on display

Rapid data transfer Q
05 - Erase DTC Memory

- Press Q button to confirm input.

Indicated on display

Rapid data transfer ->
DTC Memory is erased!

DTC memory is now erased.

- Press arrow right button.

Indicated on display

Rapid data transfer HELP
Select function XX

Note:
^ This message indicates an error in the test sequence.

Attention!
DTC Memory was not interrogated

^ This message indicates an error in the test sequence.

Rapid data transfer ->
DTC Memory was not interrogated

^ Adhere exactly to the test sequence: first check DTC memory, and if necessary, repair malfunctions, then erase DTC memory.