Ribbed Belt, Without Automatic Tensioner, Adjusting Tension

03 - Service Procedures


Ribbed Belt, without Automatic Tensioner, Adjusting Tension

Special tools, testers and auxiliary items required

• Clamping Lever (3297)





- Loosen the bolts - 1 + 2 -.





3 Clamp
4 Generator

- Insert clamping lever, secure with pin - arrow - and tip generator down (use e.g. torque wrench as drive for 3297).





- Press generator as far as clamp stop at least three times using clamping lever to ensure optimum ease of movement.

- Tighten first the lower, then the upper generator bolt to 25 Nm.