Login Procedure

Login Procedure
^ All functions that have so far been carried out with Scan Tool VAG1551 can now also be carried out with the Vehicle Diagnostic Testing and Information System VAS5051.
^ The login procedure can only be performed once per calibration.

Coding is only possible after the workshop code (WSC) has been introduced into Scan Tool VAG1551 or the Vehicle Diagnostic Testing and Information System VAS5051.

Test Sequence
- Connect Scan Tool VAG1551 and select (address word 03) brake electronics control module with ignition switched on.

Indicated on display:

Rapid data transfer HELP
Enter address word XX

- Press key 1 and 1 (Function "Login procedure" is introduced with 11).

Indicated on display:

Rapid data transfer Q
11 Coding 2

- Confirm entry with key Q.

Indicated on display:

Coding 2 HELP
Enter code number XXXXX

- Enter code number "40168".
- Confirm entry with key Q.

Indicated on display:

Rapid data transfer HELP
Enter address word XX