Window Regulator

Window Regulator

• Removing and installing is described only for the right window regulator. Removing and installing the left window regulator is derived accordingly from this.

Removing

- Remove outer door panel. Refer to => [ Outer Door Panel ] Outer Door Panel.

- Remove side impact protection. Refer to => [ Side Impact Protection Assembly Overview ] Side Impact Protection Assembly Overview.

- Remove door window. Refer to => [ Door Window ] Door Window.

- Remove bolts - 2 - from mounting plate - 5 -.

- Remove bolts - 3 - for window regulator.

- Remove window regulator - 1 - with drive motor - 4 - and mounting plate - 5 - for window regulator motor from inner door part.

- Disconnect harness connectors for window regulator motor. Refer to => [ Window Regulator Motor ] Window Regulator Motor.





Installing

Installation is performed in the reverse order of removal.

A function test must be performed before outer door panel is installed.