Brake System and Shock Absorbers, Checking for Leaks and Damage

Brake System and Shock Absorbers, Checking for Leaks and Damage

Check the following components for leaks and damage:

• Brake Master Cylinder

• Brake booster (with ABS: hydraulic unit)

• Brake pressure regulator

• Calipers

• Shock absorber (only during Inspection)

• Make sure the dust caps are on the brake fluid bleed valves.

- Make sure the brake hoses are not twisted.

- Turn steering to left stop and to right stop. During this operation no brake hose must touch any vehicle components.

- Check brake hoses for porosity and cracks.

- Check brake hoses for chafing.

- Check the brake line connections for leaks and corrosion and make sure they are attached securely.


Repair any malfunctions (repair procedure).