Windshield and Rear Window Washer System

Windshield and Rear Window Washer System

Perform the following work:

- Disconnect by pulling apart both halves of coupling.





- Reconnect by pushing both halves of coupling together until felt and heard to engage.

- Turn the locking ring - 1 - 90° - arrow - and disconnect the hose connection.





- Install the hose connection and turn the locking ring - 1 - in - direction of arrow - until it locks.

- Turn the clip - 1 - approximately 1 mm - arrow - and disconnect the hose connection.





- Install the hose connection and press the clip - 1 - on until it locks.

- Remove the clip - 1 - in - direction of arrow - and remove the hose connection.





- Install the hose connection and press the clip - 1 - on until it locks.