Steering Gear

Steering Gear

• Thoroughly clean connecting points and their surrounding areas before loosening.

• When installing steering gear, make sure centering sleeves are correctly seated between console and steering gear.

• Place removed parts on a clean surface and cover to prevent contamination. Use foils and paper. Do not use fluffy cloths!

• Only install clean components: Only unpack replacement parts immediately prior to installation.

• Use exclusively lubricants and sealants marked with part numbers.

• Carefully cover over opened components or seal, if repairs are not carried out immediately.

• As of MY 2009 steering gear generation 3 is being installed. Information on the differences between generation 2 and generation 3, refer to => [ Differences between Generation 2 and Generation 3 Steering Gears ] Description and Operation.