Fuel Rail

Fuel Rail

Removing

• Intake manifold must be removed. Refer to => [ Intake Manifold ] Intake Manifold.

- Remove the hoses from the Evaporative Emission (EVAP) canister.

- To do so, remove the hose clamp bolt - 1 -.





- Loosen the two bolts - arrows - for the fuel rail.

- Disconnect the hose connection - 1 - from the intake manifold and remove both bolts - arrows -.





- Remove the union nuts of both fuel lines - 2 and 3 -.

- Carefully pry off the linkage from the intake flap motor - 4 -.

- Remove the intake flap motor bolts - 5 -.

- Remove the fuel rail pipe - arrows - from the intake manifold.





Installing

- Installation is performed in reverse order.

• Tightening specifications, refer to => [ Fuel Rail Assembly Overview ] Fuel Rail Assembly Overview.