Diagram 90/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Induction Coil of Anti-theft Immobilizer, Instrument Cluster Control Module, Data Bus On Board Diagnostic Interface, Instrument Cluster





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

D2 - Induction Coil of Anti-theft Immobilizer

J285 - Instrument Cluster Control Module Component Locations Locations

J362 - Anti-theft Immobilizer Control Module

J519 - Vehicle Electrical System Control Module Component Locations Vehicle Electrical System Control Module -J519-

J533 - Data Bus On Board Diagnostic Interface Component Locations Locations

J538 - Fuel Pump (FP) Control Module Locations

K - Instrument Cluster

K47 - ABS Warning Lamp

K75 - Airbag Malfunction Indicator Lamp (MIL)

K132 - Electronic Power Control (EPC) Warning Lamp

K155 - ASR/ESP Control Lamp

K169 - Shift Lock Indicator Lamp

T2x - Double Connector, on D2

T20 - 20-Pin Connector, on J533

T10v - 10-Pin Connector

T36 - 36-Pin Connector, on J285

(B277) - Plus Connection 1 (15a) (in main wiring harness)

Previous Diagram 90/2 (Tracks 1-14)

Next Diagram 90/4 (Tracks 29-42)