Transmission Mount, ASMT

Transmission and Mount Tightening Specifications (GTI and Eos 2.0L) - 02E, 6 Speed DSG A/T FWD





M12 - 80 Nm

^ If socket SW 18 T10179 is used: 65 Nm.

M10 - 40 Nm

- Arrows point to alignment sleeves
- Replace all left transmission mount bolts.
- First install all new bolts by hand.





- -A- first tighten the bracket to transmission bolts -1- to 40 Nm with an additional 90 degree turn.
- When tightening bolts -2-, bracket can be pried into correct seating with screwdriver. - Bolts 2 - tightening specification: 60 Nm + 90 degree.

Subframe bolts must be replaced.