Coolant Fan V7 and Coolant Fan 2 V177, Removing and Installing

Coolant Fan V7 and Coolant Fan 2 V177, removing and installing

Coolant fan, removing
- Remove engine cover/air filter.





- Remove upper mounting bolts - arrows - of air intake elbow.
- Remove noise insulation.





- Disconnect harness connector - 1 - and remove lower mounting bolts of air intake elbow - arrows -.
- Remove air intake elbow downward.





- Disconnect electrical harness connector - 1 - and lay cable free.
- Remove nuts - arrows - and remove fans.

Coolant fan, installing
Installation is in reverse order of removal, note the following: