Selector Shafts and Forks, Installed Position

Selector Shafts and Forks, Installed Position






1 Input shaft
2 Output shaft, 1st to 4th gears
3 Output shaft 5th, 6th and reverse gear
4 Reverse shaft
A Selector shaft, for 3rd and 4th gear
B Selector shaft, for 1st and 2nd gear
C Selector shaft, for 5th and 6th gear
D Reverse gear selector fork *

• * There are alternate versions of the reverse gear selector fork. Refer to => [ Reverse Gear Selector Fork Differentiation ] Shift Forks.

• * Different reverse gear selector fork mountings: On the selector shaft behind the 5th and 6th gear selector fork, refer to => [ Reverse gear selector fork mounted on the selector shaft behind the 5th and 6th gear selector shaft : ] Transmission, with a Sealing Cap Circlip for the Input Shaft, or on the selector shaft with the 5th and 6th gear selector shaft - C -, refer to => [ Reverse gear selector fork mounted on the selector shaft with the 5th and 6th gear selector fork : ] Transmission, with a Sealing Cap Circlip for the Input Shaft.