Crankshaft Needle Bearings

Crankshaft Needle Bearings

Only for vehicles equipped with the Direct Shift Gearbox (DSG(R))

Special tools, testers and auxiliary items required

• Puller (T10055)

• Adapter (T10055/3)

• Centering Mandrel (3176)

• or Drift (VW 207 C)

• Puller, for example, Kukko Extractor 14.5-18.5 mm (21/2)

Removing

- Remove using a standard puller, for example, kukko extractor 14.5-18.5 mm (21/2) - arrow -, the adapter (T10055/3) and the puller (T10055).






Installing

• The side of the needle bearing with writing on it must be readable when installed.

- Drive in the bearing using the drift (VW 207 C) or the centering mandrel (3176).






Installed depth dimension - a - = 2 mm