Instrument Cluster, Additional Information,

Instrument Cluster From MY 2000, Additional Information,

Instrument clusters from MY 2000 are integrated into the vehicle CAN Data Bus network (may also be known as "CAN-Bus" or "Data-Bus").

The Data Bus On Board Diagnostic Interface J533 (which is integrated into the instrument cluster) enables data to be exchanged between the vehicle CAN Data-Bus network and the Data Link Connector (DLC) "K-wire".

The Data Bus On Board Diagnostic Interface J533 has specific On Board Diagnostic (OBD) capabilities.

On Board Diagnostic from MY 2000

Replacing Instrument Cluster, Notes

- In addition to the normal service procedure of coding the instrument cluster and adapting the odometer reading, the Data Bus On Board Diagnostic Interface J533 must also be separately coded according to vehicle market version and equipment level variables.

Additional Information
- Complaint/symptom based Technical Bulletins ("Service Fixes"): Technical Bulletins
- Instrument cluster, On Board Diagnostic (OBD)