Air Door Cable: Locations

Heating and A/C Cables Component Overview

• Cable sleeve ends are color coded.

• Check cables before installing. Replace binding or damaged cables.

• Attach cables to removed controls first and then attach to levers at heating/evaporator unit.

• All air doors must audibly move onto end stops when turning controls.





1 Central door cable

• From air distribution rotary control to central door

• Cable sleeve marking: Yellow

• Installing and adjusting => [ Central Door Cable ] Central Door Cable

2 Footwell/defrost door cable

• From air distribution rotary control to footwell/defrost door

• Cable sleeve marking: Green

Removing:

- Remove heating and A/C controls => [ Heating and A/C Controls ] Heating and A/C Controls

- Unclip cable from controls

- Remove steering column trim.

- Unclip cable at heater/evaporator unit.

Installing:

- Installing and adjusting => [ Footwell/Defrost Door Cable ] Footwell/Defrost Door Cable

3 Heating and A/C controls

• Removing and installing => [ Heating and A/C Controls ] Heating and A/C Controls

4 Temperature door cable

• From temperature rotary control to temperature door

• Cable sleeve marking: Beige

• Installing and adjusting => [ Temperature Door Cable ] Temperature Door Cable