Diagnostic Trouble Code (DTC) Memory, Erasing (Function 05)

Diagnostic Trouble Code (DTC) Memory, Erasing (Function 05)

NOTE: Erasing DTC memory (function 05) is only possible after checking DTC memory (function 02). If DTC memory cannot be erased, check DTC memory again and rectify indicated malfunctions.

Prerequisites
- Check DTC memory.
- All malfunctions repaired.

After checking DTC memory:

Rapid data transfer HELP
Select function XX

Indicated on display (select function):
- Press buttons -0- and -5- to select function 05, "Erase DTC memory."

Indicated on display:

Rapid data transfer Q
05 Erase DTC memory

- Press -Q- button to confirm input.

Rapid data transfer ->
DTC memory is erased.

Indicated on display (DTC memory is now erased).
- Press -> button.

Rapid data transfer HELP
Select function XX

Indicated on display (select function):
- End output (function 06).

NOTE:
- If this appears in the display, test sequence is faulty.
- If this appears in the display, test sequence is faulty.

Adhere exactly to test sequence: First check DTC memory, repair malfunctions if necessary, then erase.