Charge Air Cooler, Assembly Overview

Charge Air Cooler (Rabbit/GTI), Assembly Overview

NOTE: Noise booster, assembly overview.







1 - 5 Nm
2 - Bearing
- For charge air cooler
3 - Air charge cooler
- To remove, move lock carrier into service position
4 - Charge air pipe
5 - 10 Nm
6 - Charge air hose
- Assembly of hose connections with connection couplings
7 - Charge air pipe
- To noise booster
8 - Charge air hose
- Assembly of hose connections with connection couplings
9 - Hose clamp
10 - Charge air hose
- To Throttle Valve Control Module J338
11 - Charge air hose
12 - Charge air pipe
13 - Charge air hose
14 - 8 Nm
15 - Noise booster
- Mounting parts
16 - Charge air pipe
17 - Charge air hose
- Assembly of hose connections with connection couplings
18 - Charge Air Pressure Sensor G31
19 - 5 Nm