Sealing Flange, Assembly Overview

Sealing flange, assembly overview





1. 90 Nm plus an additional 90° (1/4 turn)

2. Crankshaft toothed belt sprocket

3. 15 Nm

4. Seal
^ Do not additionally oil or grease sealing lip of sealing ring

5. Sealing flange on belt pulley side
^ Must be located on alignment pins
^ To remove and install, remove oil pan

6. Cylinder block

7. 60 Nm plus an additional 90° (1/4 turn)
^ Replace

8. Flywheel/drive plate

9. Intermediate plate
^ Must be located on dowel sleeves
^ Do not damage or bend when doing assembly work

10. Sealing flange with seal
^ Only replaced as complete unit

11. Diamond disc
^ Replace