Sealing Flange For Crankshaft on Flywheel Side, Removing and Installing

Sealing flange for crankshaft on flywheel side, removing and installing

Sealing flange, removing
- Remove transmission.
- Remove flywheel.
- Remove oil pan.





- Remove sealing flange - arrows -.

Sealing flange, installing

Note:
^ Do not additionally oil or grease sealing lip of oil seal!

- Clean sealing surfaces. They must be free of oil and grease.
- Before installing, remove oil remains from end of crankshaft with a clean cloth.
- To install, use support sleeve provided. Supporting sleeve may only be removed after sealing flange has been slid onto crankshaft pin. Sealing flange sits on alignment pins.





- Tighten mounting bolts - arrows - to 15 Nm.
- Install oil pan.

The rest of assembly is in reverse order of disassembling.