Brake Pedal Assy: Locations

Brake pedal, assembly overview

CAUTION: The path of the brake pedal must not be shortened via extra floor mats.

Before installing, lubricate all mounting points with grease, part no. G 000 602.





1. Mounting bracket

2. Self-locking hex nut, 25 Nm

3. Brake Light Switch F
^ Includes Brake Pedal Switch F47
^ On vehicles from CW 45/05, Brake Light Switch F is located on brake master cylinder
^ Clip brake pedal at pressure rod of brake booster before installing brake light switch.
^ Lubricate tappet head with polycarbamide grease G 052 142 A2.

4. Hex head bolt

5. Brake pedal

6. Cover

7. Ball socket

8. Mount
^ For ball head of brake servo push rod

9. Self-locking hex nut, 25 Nm

10. Bushing

11. Pivot pin