Power Seat Inclination Adjuster, Removing and Installing

Power Seat Inclination Adjuster, Removing And Installing

Removal and installation of seat inclination adjuster is described for left backrest frame. Removal and installation of the right seat inclination adjuster is performed in the same way.

Removing
- Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095.
- Remove front seat.
- Attach the seat to the fixture for seat repair VAS 6136.
- Remove front right seat trim.
- Remove left power seat trim.
- Remove retainer and power seat bracket.
- Remove front seat drawer mount.
- Remove front seat backrest.
- Remove cover and upholstery from front seat backrests.
- Disconnect wiring harness - 1 - from inclination adjuster - 2 -.
- Remove bolt - 3 -.
- Remove the two sets of bolts - 4 - and - 5 -.







- Remove inclination adjustment - 2 - from seat frame.







Installing
- Installation is performed in the reverse order of removal.