Recall - Tire Label Non-Compliance

Subject: 2006 Model Year New Beetle Equipped with 17-Inch Wheels And a 2.5L Engine

Install New Tire Information Label

February 2006

















Label Installation Instructions





- Tire and Loading Information label





Set the parking brake fully. Move the selector lever to P (Park) for an automatic transmission or N (Neutral) for a manual transmission. Switch off the engine and remove the ignition key.

- Open driver's side door
- Locate existing TIRE AND LOADING INFORMATION label -arrow-
- Thoroughly clean present label with soap and water and dry completely
- Remove backing from new TIRE AND LOADING INFORMATION label and affix over existing label
- Ensure that no bubbles appear under new label
- Close driver's side door

Campaign Work Procedure

Parts:








- (supplied to customer)

Work Sequence





Set parking brake fully. Move selector lever to P (Park) for automatic transmission or N (Neutral) for manual transmission. Switch off engine and remove ignition key

- Open driver's side door
- Locate existing TIRE AND LOADING INFORMATION label -arrow-
- Thoroughly clean present label with soap and water and dry completely
- Remove backing from new TIRE AND LOADING INFORMATION label and affix over existing label
- Ensure that no bubbles appear under new label
- Close driver's side door

WORK IS COMPLETE