Gear Change Mechanism, Checking

Gear change mechanism, checking, 01M, 4 Spd. A/T

Selector lever in "P" position and ignition switched on
^ Brake pedal not depressed:
Selector lever is locked and cannot be shifted out of P position. Shift lock solenoid blocks selector lever.

^ Brake pedal depressed:
Shift lock solenoid releases selector lever. It is possible to shift into a driving range.

Selector lever in "N" position and ignition switched on
^ Brake pedal not depressed:
Selector lever is locked and cannot be shifted out of N position. Shift lock solenoid blocks selector lever.

^ Brake pedal depressed:
Shift lock solenoid releases selector lever. It is possible to shift into a driving gear.

Note:
^ The starter must not operate in the selector lever positions "1", "2", "3", "D" or "R".
^ When traveling at speeds above 5 km/h and shifting into selector lever position N, shift lock solenoid must not engage and block selector lever. Selector lever can be shifted into a driving gear.
^ When traveling at speeds below 5 km/h (almost stopped) and shifting into selector lever position N, shift lock solenoid must not engage until after approximately 1 second Selector lever cannot be shifted out of N position until brake pedal is depressed.