Reading

Read Measuring Value Block

WARNING:
- Only visual check of wiring.
- Do not carry out electrical continuity tests or measurements to ignition circuits.
- Only check wiring with ignition switched off.

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -8- (08 initiates the "Read Measuring Value Block" function).

Indicated on display:

Rapid data transfer Q
08 Read Measuring Value Block

- Confirm entry with the -Q- button.

Indicated on display:

Read Measuring Value Block HELP
Input display group number XXX

- Select relevant display group number and confirm entry with -Q- button.

Indicated on display: (1 to 4 = Display zones)

Read Measuring Value Block 1 ->
1 2 3 4

The explanation of the individual display zones on the display is found in the evaluation of display group numbers. Evaluating Measured Value Blocks

NOTE: Some of the indicated display groups are only meaningful for respective vehicle equipment (e.g. side airbag).

If the displayed values in all display zones are "correct":

- Press -> button.

Indicated on display:

Rapid data transfer HELP
Select function XX

NOTE: Check DTC memory after completing the function "Read Measuring Value Block". Displaying & Reading Trouble Codes