Vacuum Pump: Service and Repair

Brake system vacuum pump -V192-, removing and installing
There are no provisions for servicing the brake system vacuum pump -V192-. If a malfunction is detected the brake vacuum pump -V192- must be replaced.

The brake system vacuum pump -V192- is located lower left on the subframe.

Removing





- Remove bolts -1- on bracket for brake system vacuum pump -V192-.
- Pull hose (arrow) off brake system vacuum pump -V192-.
- Take out brake system vacuum pump -V192-.





Bracket (arrow) for brake system vacuum pump -V192-.
- Remove lock nut -2- from bolt -1-.
- Remove bolt -4-.
- Take bracket out.
- Remove bolts -3- to disassemble the bracket (arrow) further.

Installing
Install in reverse order.





Tightening torques

Tightening torques: