Diagnostic Trouble Code (DTC) Memory, Erasing (Function 05)

Diagnostic Trouble Code (DTC) Memory, Erasing (Function 05)

NOTE: After erasing the DTC memory its contents will automatically be indicated. If the DTC memory cannot be erased, again check DTC memory and repair malfunctions.

Requirements
- DTC memory checked. Diagnostic Trouble Code (DTC) Memory, Checking (Function 02)
- All malfunctions repaired.

After Diagnostic Trouble Code (DTC) memory has been successfully checked:

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press keys 0 and 5. (05 selects the "Erase DTC memory" function.)

Indicated on display:

Rapid data transfer Q
05 Erase DTC memory

- Confirm entry with key Q.

Indicated on display:

Rapid data transfer ->
DTC memory is erased!

The DTC memory is now erased.

- Press -> key.

Indicated on display:

Rapid data transfer HELP
Select function XX

NOTE:
- If this appears in the display, the test sequence is faulty.
- If this appears in the display, the test sequence is faulty.
- Adhere exactly to test sequence: First check DTC memory, if necessary repair malfunctions, then erase.