Power Window Regulator Switches In Front Passenger's Door/Rear Doors, Removing and Installing

Power Window Regulator Switches In Front Passenger's Door/rear Doors, Removing And Installing

NOTE:
The procedure for removing and installing the
- Right Front Power Window Regulator Switch -E41-
- Left Rear Power Window Regulator Switch -E52-
- Right Rear Power Window Regulator Switch -E54-
is essentially the same for all switches. The following illustrates the procedure for -E41-.

Removing

CAUTION:
Before beginning repairs on the electrical system:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.

- Removing (appropriate) door trim
- Disconnect electrical connector at switch module.







- Bend mounting frame -B- out on the longer switch side -A- and remove switch from mounting frame.

Installing
Install in reverse order of removal.