Special Tools and Equipment

Special Tools and Equipment





^ VAS 5051 tester
^ VAS 5051/1 or VAS 5051/3 diagnostic cable

WARNING!
^ Test equipment must always be secured on the rear seat during a road test.
^ Drivers must NEVER operate these tools while driving.





- With ignition switched off, connect VAS 5051 to Data Link Connector (DLC) with VAS 5051/3 diagnostic cable.





- Switch on tester (arrow).
The tester is ready for operation when it displays the image (photo) of a vehicle.
- Switch on ignition.
- Touch the field / the button on the screen: Guided Fault Finding.
- Select one after another:
^ Brand
^ Model
^ Model year
^ Version
^ Engine identification
- Confirm the entered data.

Note: Wait until tester has checked all control modules installed in the vehicle.

- Press the Go To button and select the "Function/component selection" function.
- Select "Suspension" on the display
- Select "Brake system" on the display
- Select the displayed "01-On Board Diagnostic (OBD) capable system..." on the display
- Select the displayed "Anti-lock Brake System (ABS)..." on the display
- Select the displayed "Function" on the display.

Note: Now, all possible functions of Anti-lock Brake System (ABS) installed in vehicle are displayed.

- Select the desired function on display.