Power Window Switches In Driver's Door - With Blue Instrument Cluster Illumination, Removing and Installing -

Power Window Switches In Driver's Door - Vehicles With Blue Instrument Cluster Illumination, Removing And Installing

NOTE: On vehicles with blue (instrument cluster) illumination, individual power window switches in the driver's door cannot be removed/replaced separately. The complete switch unit must be removed.

Removing

CAUTION:
- Switch off all electrical consumers.
- Switch off ignition and remove ignition key.

- Remove driver's door handle
- Lift release handle with controls upwards from door trim and carefully turn over.
- Disconnect electrical connections.







- Remove screws -arrows- and pull switch module from trim.

Installing
- Install in reverse order of removal.