On-Board Diagnostic (OBD), Performing

On Board Diagnostic (OBD), performing, 01V, 5 SPD. A/T (OBD)

Test conditions:
^ Selector lever in position "P" and handbrake applied.
^ Vehicle voltage supply in order.
^ Fuses 15 and 31 OK
^ Check Ground connections for transmission:
- Check Ground connections for corrosion and poor contact; repair if necessary.
- Ground connection point is located in engine compartment, below battery.
- Check battery Ground strap and Ground strap between battery and transmission.

Safety precautions
Observe following if test and measuring instruments are required during a test drive:
^ Test and measuring instruments must be secured to rear seat and operated by a 2nd person from this location.
^ If test and measuring equipment is operated from the passenger seat, the passenger-side airbag could be activated in case of an accident and could lead to injury to the person seated there.