Clutch Pedal Switch F36, Removing and Installing (Clutch Pedal Switch Is Secured to Mounting Bracket By A Retaining Clip)

Clutch Pedal Switch F36, removing and installing (clutch pedal switch is secured to mounting bracket by a retaining clip), 01A, 5 SPD. M/T (AWD)
In order to assure sufficiently secure seating, Clutch Pedal Switch F36 must not be installed more than once.

Removing
^ Remove storage compartment on drivers side.
^ Disconnect connector at Clutch Pedal Switch F36.
^ Pull switch out of retaining clip.

Installing
In order to assure sufficiently secure seating, Clutch Pedal Switch F36 must not be installed more than once.
^ Clutch pedal is not operated.





^ Press new switch - 1 - into installed retaining clip - 2 - to stop on clutch pedal.
^ Check/adjust Clutch Pedal Switch F36.
^ Connect harness connector.