Rear Seatbelt With Belt Tensioner, Removing and Installing (Passat Wagon)

Rear Seatbelt With Belt Tensioner, Removing And Installing (Passat Wagon)

NOTE: The illustrations cover only the right side of the vehicle, the left side of the vehicle is the mirror image.

- Switch ignition off.
- Fold seat cushions of rear seats forward.
- Remove luggage compartment cover.
- Remove right rear backrest (two parts)
- Remove storage area floor covering.
- Remove rear lock carrier cover (Wagon).
- Remove storage area trim (Wagon)







- Unscrew bolt - 1 - (40 Nm) and remove belt end fitting - 2 - from body.

NOTE: When installing, markings - 3 - and - 4 - must align to guarantee correct installation position of components.







- Remove cover - 1 - from belt guide bracket - 2 -.
- Remove belt guide bracket - 2 - from belt guide.







- Remove bolts - 1 - and - 2 - (5 Nm) and remove belt guide - 3 -.







- Remove bolt - 1 - (5 Nm).
- Unscrew bolt - 2 - (40 Nm) and remove automatic belt retractor - 3 - from mount in body.
- Guide seatbelt tab - 4 - and belt end fitting - 5 - through opening in body.