Automatic Belt Retractor, Removing

Automatic Belt Retractor, Removing

- Remove seatbench backrest.







- Pry off cover cap - 1 - from seatbelt guide - 2 -.
- Unscrew belt end fitting - 3 - from floor assembly (40 Nm).
- Unclip seatbelt guide - 2 - and remove from belt - 4 -.
- Remove cover and cushion for seatbench backrest.







- Remove hex bolt - 1 - (40 Nm) and belt guide - 2 - from support - 3 -.
- Remove hex nut - 5 - (40 Nm) or hex bolt (solid backrest) and unhook belt retractor - 4 - from support - 3 -.
- Remove seatbelt with belt guide from support - 3 - downward.

NOTE: To unreel seatbelt, automatic belt retractor must be held in installation position.