Fuel Distributor With Fuel Injectors, Disassembling and Assembling

Fuel Distributor With Fuel Injectors, Disassembling And Assembling (Vehicles With Engine Code ATW, AUG, AWM)







I. Engine code ATW
II. Engine code AUG, AWM

1. Retaining clip
- Make sure clip is correctly seated on fuel injector and fuel rail
2. Sieve
3. Fuel pressure regulator
4. O-ring
- Replace if damaged
5. Fuel injectors (Cylinder 1 Fuel Injector -N30- through Cylinder 4 Fuel Injector -N33-)*
- Resistance 12 to 17 ohms
6. Fuel distributor
- Tighten to 10 Nm
7. Connection, return line
8. Connection, supply line