Section F - Reinstall Battery Tray and Battery

^ Reinstall battery tray

^ Reinstall nuts and bolt -arrows- and tighten to 25 Nm (18 lbs.-ft.)

^ Reinstall battery





^ Reinstall battery hold down bracket, install bolt - arrow - and tighten to 25 Nm (18 lbs.-ft.)

^ Check battery for proper seating after installation





^ Reconnect angled connector -arrow- of central gas vent from battery (if present)

^ Connect positive battery cable (POS) to positive (+) battery terminal
- Tighten nut to 5 Nm (44 lbs.-in.)