HP2 Brake Caliper, Servicing

HP2 brake caliper, servicing

Note:
^ Only use mineral spirits to clean brake parts.
^ When carrying out repairs, install all parts supplied in repair kit.
^ New brake calipers are filled with brake fluid and pre-bled.
^ Apply thin coat of assembly paste G 052 150 A2 to brake cylinders, pistons and seals.





1 - Protective cap
^ Push onto bleeder valve

2 - Bleeder valve
^ Apply a thin coat of assembly paste G 052 150 A2 to the threads before screwing in.

3 - Brake caliper housing

CAUTION! Do not separate the two housing halves (multi-point socket head bolts). If the protective caps of the guide pins are damaged, replace caliper.

4 - Seal

5 - Piston
^ Apply thin coat of assembly paste G 052 150 A2 to piston before inserting

6 - Protective cap
^ Do not damage when inserting piston