Switch For Unlocking, Rear Lid Handle -E234-, Removing and Installing

Switch For Unlocking, Rear Lid Handle -E234- From 10.00, Removing And Installing

NOTE: On sedan models, the switch must be replaced in conjunction with the rear lock carrier in the event of malfunction. Lock carrier, removing.

Removing

CAUTION:
- Switch off all electrical consumers.
- Switch off ignition and remove ignition key.







- Remove screws -arrow A-, unclip trim-arrowsB- and remove trim.







- Disconnect electrical connection -1-
- Loosen screws -arrows- and remove mounting frame.

NOTE: Do not remove screws. Springs are located under screws.

- Remove switch from rear lid.

Installing
Install in reverse order of removal.