Sunroof / Moonroof Windguard: Service and Repair

Wind Deflector, Removing And Installing Removing

- Open sunroof glass panel completely.
- Press wind deflector with height stop out of front roof cut-out and tilt wind deflector open vertically.
- Insert special tool Hook for front end 3370 between roof edge and wind deflector bearing - arrow -.
- Pull wind deflector bearing out of side locking mechanism of left and right guide rails using special tool Hook for front end 3370 in direction of - arrow -.







- Remove wind deflector upward from guide rail.

Installing
- Insert wind deflector into guide rail and slide wind deflector with height stop under front roof cut-out at left and right sides.
- Using light pressure, press wind deflector bearing into guide rails.

NOTE: Wind deflector bearing must engage in guide rails audibly.