Glass Panel For Sunroof, Installing

Glass Panel For Sunroof, Installing

- Panel must be installed in "0" position (panel closed).

"0" position:

Marking - arrow - on upper part of rear guide - 1 - must be located on both sides between markings dimension - a - at slotted guide rail - 2 -.

Slotted guide rail - 2 - must be engaged in guide rail (cannot be moved by hand).

If this is not case, adjust parallel movement.







- Insert sunroof panel from above and install securing bolts (guide rail/panel).







- Slightly tighten securing bolts ( Torx T25).

NOTE: Tighten mounting bolts after panel height adjustment 4.5 Nm.