Lock Cylinder, Removing and Installing (Wagon)

Lock Cylinder, Removing And Installing (Wagon) --> 09.00

Removing







- Slide lift rod - 1 - into positioning motor - 2 - - arrow -.







- Turn lock cylinder - 1 - clockwise 90 ° - arrow A - and then remove from carrier toward front - arrow B -.

Installing







- Insert lock cylinder - arrow A - into carrier - 1 - and turn counterclockwise - arrow B - 90 °.







- Lift rod - 1 - must be pulled out of positioning motor - 2 - in this position. Simultaneously, lock cylinder engages in carrier with an audible click.