Control Module Version, Checking

Check Control Module Version

- Connecting Scan Tool. Scan Tool Connecting
- Initiating On Board Diagnostic (OBD). On-Board Diagnostics (OBD) For Seat Adjustment, Initiating
- Switch on ignition.
- Press button -1- for "Rapid Data Transfer" mode.
- Switch on printer with Print button (warning lamp in button lights up).
- Press buttons -0- and -1-.

Indicated on display

Rapid data transfer Q
01 - Check control module version

- Confirm with -Q- button.

The control module identification will be shown on the V.A.G 1551 Scan Tool display, e.g.

3B1959760XX Seat adjustment FS0001 ->

Breakdown of display:
- Part No. of control module
- System designation: (XX seat adjustment DS0001)

- Press -> button.

Indicated on display

Rapid data transfer HELP
Select function XX

NOTE:
- If one of the malfunction messages opposite appears in the display, the possible causes of the malfunction can be printed out with the HELP button.
- Ignition must be switched on.
- Malfunctions have occurred at the start of or during the program (external interference?).
- Check diagnostic cable as well as voltage supply and Ground connection.
- Press buttons -0- and -6- to end the output.

Indicated on display

Rapid data transfer Q
06 - End output

- Confirm with -Q- button.

Indicated on display

Rapid data transfer HELP
Enter address word XX

- Switch off ignition.
- Disconnect connector to V.A.G 1551 Scan Tool.