Diagnostic Trouble Code (DTC) Memory, Erasing (Function 05)

Diagnostic Trouble Code (DTC) Memory, Erasing (Function 05)

NOTE: Erasing DTC memory (function 05) is only possible after checking DTC memory (function 02). If DTC memory cannot be erased, check DTC memory again and rectify indicated malfunctions.

Prerequisites
- DTC memory checked.
- All malfunctions repaired.

After checking DTC memory:

Readout in display

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -5- to select "Erase DTC memory" function 05.

Readout in display

Rapid data transfer Q
05 Erase DTC memory

- Press -Q- button to confirm input.

Indicated on display: (DTC Memory is erased)

Rapid data transfer ->
DTC memory is erased.

- Press -> button.

Indicated on display (select function):

Rapid data transfer HELP
Select function XX

- End Output (function 06). End Output (Function 06)

NOTE:
- If this appears in the display, the test sequence is faulty.
- If this appears in the display, the test sequence is faulty.
- Adhere exactly to test sequence: First check DTC memory, repair malfunctions if necessary, then erase.