Reading

Read Measured Value Block

Special tools and equipment
V.A.G 1551 Scan Tool with cable V.A.G 1551/3
- Connecting Scan Tool. Scan Tool Connecting
- Initiating On Board Diagnostic (OBD). On-Board Diagnostics (OBD) For Seat Adjustment, Initiating

The measured values in the functions Read Measured Value Block and Basic Setting are described during the individual component test. This table serves only as an overview.

The measured value block is divided into 6 display group numbers. The assignment of the individual display groups can be taken from the display group overview. Evaluating Measured Value Blocks

Indicated on display

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -8- (08 initiates the "Read Measured Value Block" function).

Indicated on display

Rapid data transfer Q
08 - Read Measured Value Block

- Confirm with -Q- button.

Indicated on display

Read Measured Value Block HELP
Input display group number XXX

NOTE: The display group number 001 is an example to illustrate the sequence.

- Press buttons -0-, -0- and -1- for "display group number 1" and confirm entry with -Q- button.

Indicated on display (1...4 = display fields)

Read Measured Value Block 1 ->
1 2 3 4

NOTE: To change to another display group proceed as follows:







- Displayed after pressing -> button.

Indicated on display

Read Measured Value Block HELP
Input display group number XXX

- Now enter the display group number required.